The Z450
Dragonfly 39 6-Channel Radio Remote Controlled Ready-to-Fly Super Advanced
Helicopter - is a completely new
look design of bell-hiller helicopter. It is bigger than Dragonfly 35 and 40.
With new 6 channel transmitter, B28 brushless motor, 30A speed controller, firm
body and light-weight main blades, almost unbreakable rotor head. It features
the outstanding flight performance and against the wind, anti- falls the
ability, easy repair. You will feel you are driving the gas helicopter. Visit
our video for the flight performance!
Aerobatic 3D 6ch Micro R/C
Helicopter 2005 Brand
6 channel Ready to Fly Complete version
Dragonfly #39 3D Micro Helicopter
Full 6 channel Advanced
Helicopter, 3D aerobatic flight become possible
CUSTOM BUILT! SIMILAR TO T-REX 450 CONSTRUCTION
3500RPM B28 Brushless
motor + 30A ESC + Li-Po 1800 Battery+charger
Bonus:
You will get
Extra FREE
White foam main
blade (Total: 2 pairs)
Key Features
-
New 6 channel Transmitter with PZT and PLT
mode lock switch, adjustable knob
-
Hard, Light weight foam Main Blades (White
color)
-
Strong built and improved
rotor head
-
New Design Breakthrough --
COMPLETELY DIFFERENT from other mini helis
-
B28 3500 RPM Brushless Motor & 30A Brushless ESC
-
NO TAIL Motor. Tail Rotor
powered by Belt Driven system like Gas-Helis. No need to worry about buring
tail motors or the gears striped.
-
Tail blade adopt strafe driving system and
flameout landing system
-
6 Channel R/C Set
included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control
(RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
-
6 Ch Transmitter included,
Mode 1 Left Hand Throttle 72Mhz for USA/Canada or Mode 2 Right hand throttle
35Mhz for Europe
-
Similar to T-Rex
construction, bigger than Dragonfly 35, 40
-
Easy Assembly , READY TO
FLY, Only need 8 AA Batteries for Transmitter
-
Equipped with 11.1V
1800mAh Li-po battery, about 15-20
mins flight time for each charge
-
Suitable for
Indoor/Backyard/Park (500 sq ft area)
|
Specification:
-
Main Blade
diameter: 675 mm
-
Total weight: ~ 800 g
-
Main
motor: B28 3500 RPM Brushless motor with 30A brushless ESC
-
Tail rotor diameter: 145 mm
-
Total
length: 600 mm
-
Servo:
9g x 4 pcs
-
Tail motor: No tail motor. Tail rotor powered by
belt driven system like Gas-Helicopter
|
-
Power
supply: 11.1V 1800mAh Li-Po battery + charger
-
Manual:
Full English instruction manual
-
Radio
control set:6 channel R/C 35/72Mhz set included (complete
forward/backward, left/right, up/down)
-
Pitch
Control: Rubber, Aileron, Elevator, Pitch and Throttle
-
Speed
Controller set: High quality speed controller built in
Gyro:
Original outer tail lock gyro
Flying
radius: 1000m (depend on environment)
|
|
Brushless Motor Specification:
-
Working
Voltage: 6-18V
-
Speed
Constant:
3000
RPM/V
-
Main motor: 380
Brushless
-
Hollow holding
current: < 1.5A
|
|
|
Speed Controller Specification:
|
0.0044 Ohm
Reversion:
Yes
Weight:
~32.4g
|
PACKAGE INCLUDES
- Dragonfly #39 Micro
Helicopter (80% pre-built )
- 6 Channel Receiver with
Original Speed Controller
- B28 Brushless Motor (3500RPM) & 30A Brushless ESC
- Original tail lock gyro
35Mhz right-hand /72MHz
left-hand 6Ch Transmitter with servo reverser
4 X 9g Servos
1 Pair of Crystals
11.V 1800mAh Li-Po battery
+ charger (110V or 230V)
Extra main blade (
FREE
as Bonus)
English Manual
Tool set
Color Box
|
